|
Post by stevednorris on Nov 4, 2015 9:21:48 GMT
|
|
|
Post by stevednorris on Oct 23, 2015 8:38:19 GMT
|
|
|
Post by stevednorris on Oct 22, 2015 11:38:18 GMT
I'm very tempted as it will replace the whole Mx5 instrument cluster (apart from the warning lights) with one unit. All I need is a idiots guide to the instrument cluster wiring before I'll be happy to cut the plugs apart. I've had a look on the mellens site but it isn't very clear to me.
|
|
|
Post by stevednorris on Oct 22, 2015 9:05:42 GMT
|
|
|
Post by stevednorris on Oct 1, 2015 20:01:28 GMT
It might be worth speaking to Stuart at MEV, I'm pretty sure he got his Replicar through IVA with wire wheels and 195/65/15 tyres on and it passed (just). So you should be fine with 175/65/15 tyres.
|
|
|
Post by stevednorris on Oct 1, 2015 16:31:57 GMT
I'm going to use my MX5 donor wheels and tyres for the IVA test then plan on changing them at a later date if they don't look right.
|
|
|
Post by stevednorris on Sept 22, 2015 7:50:12 GMT
They are secured a couple of securing clips in there you need to release, or wait until after you drop the fuel tank.
|
|
|
Post by stevednorris on Sept 20, 2015 16:16:27 GMT
I've got a mk2.5 donor so I only needed 1 fuel line and reused the original lines all the way from the tank to the throttle body. I got rid of the charcoal canister and put all new brake lines in.
|
|
|
Post by stevednorris on Sept 19, 2015 12:31:12 GMT
I tied a ratchet strap to my steering column and tightened it while tapping the steering rack end with a hammer. It soon gave up.
|
|
|
Post by stevednorris on Jul 15, 2015 16:19:42 GMT
I'm not really looking at the body yet, I was just discussing the fog light covers with Stewart and he asked me to post it on here. For seam sealer I'm using PU can't remember which make off the top of my head. I might try your ear idea as they did only take 10 mins to make.
|
|
|
Post by stevednorris on Jul 13, 2015 15:31:17 GMT
Thanks gwnwar, like the Tab idea.
|
|
|
Post by stevednorris on Jul 13, 2015 15:23:26 GMT
Hi, I've looked into this for my Replicar and have bought a used servo and master cylinder from a non-ABS MX5 from eBay.
|
|
|
Post by stevednorris on Jul 11, 2015 8:06:01 GMT
Hi, I just cut the mesh to size and trimmed in 5x3mm chrome trim I bought from eBay. I think CBS also sell the same trim. I've just got to work out how to fix them, I'm thinking either small button headed screws through the edge or PU adhesive.
|
|
|
Post by stevednorris on Jul 10, 2015 8:11:11 GMT
|
|
|
Post by stevednorris on Jul 10, 2015 7:59:29 GMT
|
|