|
Post by stevednorris on Jul 16, 2018 16:51:03 GMT
I put my Replicar up for sale on eBay last night, I had a great time building it and it was really good fun to drive. The only reason is I have a 6 year old so only use it when my wife and I both have days off during the week due to not having enough seats for us all. I know I will probably regret it but needs must: www.ebay.co.uk/itm/132702561128?_trksid=p2471758.m4704
|
|
|
Post by stevednorris on Mar 13, 2018 16:33:48 GMT
|
|
|
Post by stevednorris on Feb 22, 2018 8:13:46 GMT
|
|
|
Post by stevednorris on Feb 7, 2018 11:23:25 GMT
Hopefully so.
|
|
|
Post by stevednorris on Feb 7, 2018 9:50:33 GMT
|
|
|
Post by stevednorris on Jan 27, 2018 10:32:12 GMT
My horn button is on the dash, passed IVA fine.
|
|
|
Post by stevednorris on Jan 17, 2018 17:40:57 GMT
|
|
|
Post by stevednorris on Jan 17, 2018 17:23:27 GMT
Pretty sure I used EU Coolant as it is then in degrees centigrade.
|
|
|
Post by stevednorris on Jan 17, 2018 13:11:45 GMT
I had no problems with my engine temp on the PROLED, I did have to wire in a resistor in the fuel gauge wiring to get that to read correctly.
|
|
|
Post by stevednorris on Dec 1, 2017 17:00:45 GMT
I put the spacers on after the IVA.
|
|
|
Post by stevednorris on Nov 28, 2017 20:28:36 GMT
I’ve put 27mm spacers on the front and 25mm on the rear from Freaky Parts.
|
|
|
Post by stevednorris on Oct 30, 2017 17:43:27 GMT
Hi Alan, mine passed fine 4 months ago with the Lucas lenses. The fog light is a different light but I got a Lucas chrome rim and bonded it around the lens and it looks very similar to the 488 lenses now. They did check I had an F mark on the fog light.
|
|
|
Post by stevednorris on Oct 30, 2017 13:42:51 GMT
I’m away with work for a couple of days but should be able to get some on Thursday.
|
|
|
Post by stevednorris on Oct 29, 2017 11:37:53 GMT
Sorry for the late reply, been away for a few days. I can take pics, anything in particular?
|
|
|
Post by stevednorris on Oct 25, 2017 8:13:31 GMT
Hi Andy, it was dead easy, I used the standard wiring and sensor.
|
|