|
Post by dietcoke on Jun 8, 2015 6:09:06 GMT
they were 5.99 on sale, i bought five of them. so good for... anything, really.
|
|
|
Post by tonysoprano on Jun 8, 2015 7:42:14 GMT
gotta love those harbor freight moving dollies! They're surprisingly strong! I had an assembled BP engine, trans, and crossmember sitting on one and used it to move the entire assembly under the Exocet chassis.
|
|
|
Post by dietcoke on Jun 9, 2015 21:48:48 GMT
My wheels arrived today, with holeshots being on permanent backorder in the right color, I found these, very cool deep concave spoke design. They're a tad on the heavier side at 16.1 lbs each (weighed by me) but super satisfied with the cost. Less then $400/4 on ebay with free shipping. www.ebay.com/itm/371217221856
|
|
|
Post by tonysoprano on Jun 10, 2015 0:13:16 GMT
I have a set of the Holeshots for my build but think I may like those STR wheels more than the Holeshots. Good looking wheel.
|
|
|
Post by steadfast on Jun 10, 2015 1:14:56 GMT
What is the weight of a 15x8 holeshot again? Weighed by someone other than the manufacture. . .
|
|
|
Post by dietcoke on Jun 10, 2015 1:21:26 GMT
14.5 lbs on the holeshots
|
|
|
Post by buildercg on Jun 10, 2015 2:09:53 GMT
Kevin at Exomotive told me today that they're finishing up #129 this week so you're looking good to have your frame by mid/late July. I'm jealous of your delivery date and your heated garage.
|
|
|
Post by ImprobableConstruct on Jun 10, 2015 2:12:21 GMT
What is the weight of a 15x8 holeshot again? Weighed by someone other than the manufacture. . . Mine came it at 14.4 for the black chrome.
|
|
|
Post by dietcoke on Jun 10, 2015 2:38:16 GMT
Kevin at Exomotive told me today that they're finishing up #129 this week so you're looking good to have your frame by mid/late July. I'm jealous of your delivery date and your heated garage. I can't wait. I'm so excited for this thing. Hopefully I have funds to finish it (v8 odds and ends) by fall. Still about 4k short by my estimate, but I have appropriated all of the important parts already, so I can at least get it put together.
|
|
|
Post by jon on Jun 10, 2015 3:13:45 GMT
Nice looking wheels at a good price. I will give them consideration. I am skeptical on the holeshots coming in stock too. It's this or some rota grids.
|
|
|
Post by jon on Jun 10, 2015 18:28:03 GMT
My wheels arrived today, with holeshots being on permanent backorder in the right color, I found these, very cool deep concave spoke design. They're a tad on the heavier side at 16.1 lbs each (weighed by me) but super satisfied with the cost. Less then $400/4 on ebay with free shipping. www.ebay.com/itm/371217221856This is a zero offset wheel? It doesnt look like it from the photo, but my eyes May deceive me.
|
|
|
Post by einy on Jun 10, 2015 19:16:21 GMT
Those look alot like the MST MT04 wheels I have. The spokes curve back in towards the hub quite a bit, so they are 0 offset. Porky at ~ 16 lbs each, but still should be OK for my intended use.
|
|
|
Post by dietcoke on Jun 10, 2015 21:00:06 GMT
|
|
|
Post by dietcoke on Jun 10, 2015 22:42:25 GMT
My wheels arrived today, with holeshots being on permanent backorder in the right color, I found these, very cool deep concave spoke design. They're a tad on the heavier side at 16.1 lbs each (weighed by me) but super satisfied with the cost. Less then $400/4 on ebay with free shipping. www.ebay.com/itm/371217221856This is a zero offset wheel? It doesnt look like it from the photo, but my eyes May deceive me. The spokes are curved WAY in, its hard to capture in a photo. Definitely 0 offset. Very concave.
|
|
|
Post by dietcoke on Jun 16, 2015 2:31:40 GMT
Small update: Engine mostly cleaned up, new intake is ported and ready to bolt on, just waiting on new knock sensors to show before I can button the top end up. Also got the tires mounted. Small progress before chassis gets here. Got some swell orange lugnuts too. Next project is painting of subframes/control arms and the bushing replacement. Got my shop press, have to assemble it first. Perhaps tomorrow.
|
|