|
Post by p2tav on Oct 21, 2018 15:53:10 GMT
|
|
|
Post by hammy3601 on Oct 21, 2018 20:12:07 GMT
looking awesome mate
|
|
blacksweeper
Junior
Currently building a top level Exocet
Posts: 23
|
Post by blacksweeper on Nov 9, 2018 21:49:26 GMT
Very cool
|
|
|
Post by p2tav on Nov 20, 2018 15:51:00 GMT
|
|
|
Post by p2tav on Nov 20, 2018 19:00:00 GMT
|
|
|
Post by hammy3601 on Nov 20, 2018 19:00:56 GMT
WOAH!....tell me you didnt get away with using the kitchen work top for folding mate?? :-)
|
|
|
Post by p2tav on Nov 20, 2018 19:02:23 GMT
WOAH!....tell me you didnt get away with using the kitchen work top for folding mate?? :-) pmsl she was at work and she does not read forum
|
|
|
Post by p2tav on Nov 26, 2018 9:38:25 GMT
progress, I hired a trailer and took car for 4 wheel alignment I decided not to go so aggressive as neg 2 camber on the rear I felt was too much. I decided in the end to go neg 1.2 which looked a lot better stance I don't want to scrub the tyres on the inside edge as im not going to be using it on the track. it still looks aggressive but not over the top if you know what I mean. it was nice to see the car on the ramp as u can then inspect all your hard work and see any thing you might have missed. slowly getting there just front end to sort
|
|
|
Post by hammy3601 on Nov 26, 2018 14:34:11 GMT
Good progress mate, you got any pics of the stance
|
|
|
Post by p2tav on Jan 5, 2019 17:52:24 GMT
Good progress mate, you got any pics of the stance sorry it took a while not been in garage for a bit as too much going on. I hope you can see what I mean about camber.
|
|
|
Post by hammy3601 on Jan 5, 2019 17:53:39 GMT
Cheers mate and it looks great!
|
|
|
Post by p2tav on Jan 5, 2019 17:57:15 GMT
|
|
|
Post by p2tav on Jan 18, 2019 21:33:04 GMT
hi, can someone clarify the regs for iva regarding covering up parts of the frame as I see some people have and some have not ? I have posted some pics bellow to show you the areas I mean. cheers
|
|
|
Post by p2tav on Jan 19, 2019 15:47:15 GMT
gents, am I right in thinking that the wingmirrors will pass IVA I have made a template 40mm x 70mm ?
|
|
|
Post by jason82 on Jan 19, 2019 16:02:19 GMT
Not sure about the size, but have you seen the new 10kg rule ? Basically if the wing mirrors are the widest point of the car, a 10kg should fold them in. This was highlighted in this year's car builder solutions manual. I must say, I love your build, possibly one of the cleanest that I have seen.
|
|