|
Post by nzexo on Nov 11, 2013 5:12:37 GMT
Looking awesome! All ready for certification on Wednesday?
|
|
|
Post by mattapo on Nov 11, 2013 9:32:37 GMT
yep can't wait!!!!
|
|
|
Post by mattapo on Nov 13, 2013 8:44:46 GMT
Cert test was today, everything went mostly fine. Emissions were fine so that was good.
a short list, he wants a different number plate light, two of the driveshaft bolts are to short the tail lights are not secure enough he wants reflective strips on the back of the rear guards and he can't see all of the speedo so i have to move that for him.
All in all pretty easy, should only take an hour to sort.
|
|
|
Post by kiwicanfly on Nov 13, 2013 9:39:48 GMT
All in all pretty easy, should only take an hour to sort. Then you can sit back and have a cup of tea in celebration. However..... "A cup of tea! A cup of tea! Will that be the sum total of your celebration!?!? I say a cup of tea and...a gingernut."
|
|
|
Post by gwnwar on Nov 13, 2013 18:03:30 GMT
Remember your driveshaft bolt and nut should be graded units..
|
|
|
Post by mattapo on Nov 13, 2013 21:26:16 GMT
Gotta include the gingernut a.
I poped past the certifier this morning and showed him I already had all the bits to do what he wanted, he is going to get the paperwork sent off and as long as its all done when the cert plate arrives its all good!!
|
|
|
Post by red5 on Nov 13, 2013 21:34:29 GMT
nice one buddy - congrats
|
|
|
Post by kiwicanfly on Nov 13, 2013 23:21:20 GMT
I reckon that a two gingernut result.
Well Done
|
|
|
Post by jgilbert on Nov 13, 2013 23:26:00 GMT
Well done, great effort and in super quick time, just right for the NZ summer.
|
|
|
Post by mattapo on Nov 16, 2013 5:00:14 GMT
Cheers guys!!!!!
I have made most of the changes required, Fitted more supports for the break and fuel lines underneath, Fitted a different numberplate light changed the two driveshaft loop bolts made the brackets to hold the tail lights better. all thats left is to fit the brackets and move the dash so "HE" can see the speedo.
|
|
|
Post by mattapo on Nov 18, 2013 2:06:37 GMT
BAHHHHH!!!!!!!!!!!!!!!!!!!! I'm gonna go bald ripping my hair out, just had a call from the certifier, he now doesn't like that my roll bar is different from the drawing, the drawing shows the M shaped one and mine is fat with extra support.
On an up side it flew through Compliance today, so need to wait on the cert plate now which is getting pushed back day by day, GRRRRRRRRR!!!!!
|
|
|
Post by mattapo on Nov 19, 2013 7:22:18 GMT
Since I can't legally drive it yet I decided to get on with fitting the stereo. Im using a remote face marine unit. the beginnings
|
|
|
Post by kiwicanfly on Nov 19, 2013 7:25:11 GMT
A stereo You'll be adding heated seats and a cup holder next
|
|
|
Post by mattapo on Nov 19, 2013 8:55:24 GMT
HAHA, no, owning a car audio shop I kinda need to do something. Hey Ill just add another pound of boost to compensate a!!! I have been thinking about a cup holder though, gotta have somewhere to put the speights bottle.
|
|
|
Post by mattapo on Nov 27, 2013 8:18:43 GMT
I Think the pics say enough
|
|