|
|
Post by steadfast on Nov 14, 2014 20:56:09 GMT
I am told that they are sending fenders too. Because this is a requirement in CA for the BAR, and because my date for the BAR is set in stone (my temp registration expires at the end of this month and the DMV won't extend it), I think I'm being sent one of the first sets. I'm really hoping the Exomotive comes through on this one. Please pray for me!
|
|
|
|
Post by greg on Nov 14, 2014 21:01:34 GMT
For sure! I need them too. Curious to see how they fit with your wheels.
|
|
|
|
Post by clintavo on Nov 14, 2014 21:18:17 GMT
Can't wait to see how they turned out. Will you be using a hinge to mount it? Just thinking about ease of checking oil ect.
|
|
|
|
Post by JIDiesel on Nov 15, 2014 15:32:01 GMT
I am told that they are sending fenders too. Because this is a requirement in CA for the BAR, and because my date for the BAR is set in stone (my temp registration expires at the end of this month and the DMV won't extend it), I think I'm being sent one of the first sets. I'm really hoping the Exomotive comes through on this one. Please pray for me! Good luck, I hope that it all works out. |
|
|
|
Post by rauf on Nov 16, 2014 7:53:12 GMT
Wish you luck! How many times did you extend your temporary registration?
|
|
|
|
Post by steadfast on Nov 16, 2014 17:10:02 GMT
They gave me 3 months the first go around, and then I extended it again and they were kind enough to give me another 3 months. The lady said that they would not extend the temp again. I don't blame them, 6 months is very generous.
|
|
|
|
Post by greg on Nov 16, 2014 19:13:58 GMT
With the new body work, what will you do about your headlight/turn signal mounts?
|
|
|
|
Post by lhintze on Nov 19, 2014 12:42:47 GMT
Steadfast, I think I am going with the dual tip Enthuza Car exhaust as well. Looks great!
What header are you using? The site says the exhaust is a cat back but will it fit an OBX style header (longer than OEM)?
|
|
|
|
Post by steadfast on Nov 19, 2014 17:36:21 GMT
The exhaust will fit the stock header, aftermarket I'm not sure. I plan to turbo it in a few months so I have the OEM header on it now. I will say that the fit/finish for the Enthuza Exhaust is awesome. It was really bolt on, no alterations were needed.
|
|
|
|
Post by steadfast on Nov 19, 2014 17:37:03 GMT
Update: We have bodywork (mine is the one in Championship White):  It shipped and will be here on Friday. I also have the benefit of being in Atlanta this week for work. I am meeting Kevin at the airport on Thursday to pickup my fenders as they were not done in time of shipment for the other pieces. While this has been a long process of waiting, Exomotive (and Kevin) have been very response to my questions and keeping me updated. Not to mention he is meeting me at the airport to drop off the missing pieces. This will allow me to be ready for BAR next week! |
|
|
|
Post by JIDiesel on Nov 19, 2014 21:17:51 GMT
Nice to see you got your bodywork. looking good, can't wait to see your finished car!
|
|
|
|
Post by meierznutz on Nov 20, 2014 8:56:27 GMT
Steadfast, congrats on body and BAR date... you will get through fine I am sure. I am curious about two things with the bodywork.. I want to see your fenders when you get them mounted and once you have that nose home do you think there will be room for it to tilt forward? I would love t give my body guy one more headache!
|
|
|
|
Post by thestig on Nov 23, 2014 15:26:03 GMT
Any updates on bodywork install and fenders?
|
|
|
|
Post by steadfast on Nov 23, 2014 16:18:19 GMT
I'll be posting pictures of everything installed minus the fenders. They never came... As for the hood/nose cone, the fit is fantastic! The trunk is the most difficult thing to install as getting everything to line up is a pain in the ass.
|
|
montgom
Full
Love Exocet
Posts: 274
|
Post by montgom on Nov 23, 2014 23:53:58 GMT
Keep the faith
|
|
