|
|
Post by Paul (madeye) on Jun 1, 2013 21:31:02 GMT
I put some ply down to start to lay out the fuel system for space..  |
|
|
|
Post by Paul (madeye) on Jun 1, 2013 21:33:40 GMT
I put the L/H shaft seal in and fitted the shaft, bell housing bolts to pop in then fill with slippy stuff..  |
|
|
|
Post by Paul (madeye) on Jun 1, 2013 21:41:31 GMT
finalised the mount position for the electrics tray, had to bend the side to ensure clearance for the accelerator, needs powdercoating now, in black I think  |
|
|
|
Post by airforceone on Jun 1, 2013 21:41:43 GMT
Looking good Paul. That thing is going to shift.
Just a small point, you may have to move your rear stop/indicator lights further out towards
the wheel, i think they have to be within 400mm of the outside of the wheel.
Ned
|
|
|
|
Post by Paul (madeye) on Jun 1, 2013 21:47:41 GMT
big horrible brackets coming soon, the exhaust is something to offend peoples eyes... IVA
|
|
|
|
Post by Paul (madeye) on Jun 1, 2013 21:48:45 GMT
Acewell came in the post too, forgot to photo it.
same as everyone elses, temp measure ofcourse, will be for sale after build
|
|
|
|
Post by Paul (madeye) on Jun 2, 2013 6:42:33 GMT
sat watching a film with my boy last night and assembled this, the foam is the gasket (cant remember its official name, but will find back out) its approved so will IVA. i dont think the level sender could have been any more perfect length. looks pretty tidy.    getting there slowly |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 2, 2013 7:53:29 GMT
Looking good there bud..  IVA probably more bothered about the filler tube.. My last IVA, (robin hood) inspector wasn't bothered the fuel filler breather was made out of nylon line..  Yet, failed because no cert for fuel filler? At least all your hard work will only be covered for a short while ahem! |
|
|
|
Post by pauljones915 on Jun 2, 2013 8:26:02 GMT
Hey Buddy,
She is well getting on. Looking forward to a bit of track day action. Not sure ill be able to keep up mind, May be needing that Zetec sooner than I thought. Did you come up against any problems?
|
|
|
|
Post by Paul (madeye) on Jun 2, 2013 16:46:14 GMT
I'd like to say thanks to John (bossman), popped round to mine today for a brew and a chin wag, then kindly took me out for 10 mins in the rocket..
bloody great, i loved it.
i was on a bit of a negative due to timing of the build and RTR using my look, but that just brought a smile and boosted me back to wanting my toy on the road..
Cheers John
Paul
|
|
|
|
Post by deanohonda on Jun 4, 2013 11:34:36 GMT
dude our handbrake cables have arrived are we still on for saturday spoke to wayne but he can not make it he has a date with a church full of guests ;-)
|
|
|
|
Post by Paul (madeye) on Jun 4, 2013 13:46:12 GMT
i know, how selfish is he??
cant he postpone for a few hours, talking car building is much more important than turning up to please a woman in a white dress.. lol
yeah, friday is booked off so should be bang at it
|
|
|
|
Post by Paul (madeye) on Jun 7, 2013 6:27:05 GMT
Hope to loom up the engine today. Oh dear.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 7, 2013 6:38:43 GMT
Hope to loom up the engine today. Oh dear. Remember... Think redundancy, and independence... each main circuit to its own, engine is a separate creature lol... |
|
|
|
Post by Paul (madeye) on Jun 7, 2013 18:23:48 GMT
I need help quite badly. A bit stuck, i need help
i need a picture of the connector plug that fits into the ignition barrel.
and the wiring diagrams to use the rh wiper stalk to run the lights. Plus the mod to cut the track.
I know its on here somewhere i just dont know who or where.
Many thanks in advance.
Paul
|
|
IVA probably more bothered about the filler tube..
Yet, failed because no cert for fuel filler?
