|
|
Post by scooby1929 on Feb 21, 2019 16:18:17 GMT
Guys whilst I was changing my fuel pump I noticed previously I had blanked off the roll over valve. Maybe this is not a great idea. Should I fit a one way valve and a cannister. What has everyone else done?? ps I removed charcoal cannister and all pipework  |
|
|
|
Post by jason82 on Feb 21, 2019 16:40:54 GMT
It vents to the atmosphere. Just put a bit of hose onto the check valve & run it somewhere out of the way.
|
|
|
|
Post by scooby1929 on Feb 21, 2019 16:44:07 GMT
Would it not be best to do something like this guy did and put a cannister on it.  |
|
|
|
Post by miket on Feb 21, 2019 17:41:45 GMT
Later versions of the build guide included "If you do [delete the charcoal canister]then you can leave the pipe open after the check valve on the tank to allow for evaporation without a vacuum forming". Makes open ended sound good?
|
|
|
|
Post by scooby1929 on Feb 21, 2019 17:50:41 GMT
So pull off the bank and the hose and leave it open then
|
|
|
|
Post by jason82 on Feb 21, 2019 18:57:02 GMT
Yes mate. I put a hose on my one just to tidy the area up.
|
|
