noos
Newbie
Posts: 7 
|
Post by noos on May 23, 2018 6:46:10 GMT
Hi every body.
i have found a few month back in the forum, schematic for a radiatior bracket for the 2015/G type chassi and an MK1 mx5 radiator given by Stewarts. but i cannot put my hand on it anymore. and i need to have it build now.
Do any of you guy have it ? or a link back to the thread as my searche were unsucessfull.
Thank you in advance.
|
|
noos
Newbie
Posts: 7
|
Post by noos on May 23, 2018 6:50:56 GMT
|
|
|
|
Post by Stiggy on May 23, 2018 8:19:12 GMT
The problem is that it takes a lot less time to cut a pair with a pair of tin snips than it would to draw it for a laser to read.
I don't know of any firm that would want to waste laser cutting time setting up for a tiny job.
We sell them at £28 a pair in 2.5 mm high grade Al.
|
|
noos
Newbie
Posts: 7
|
Post by noos on Jun 5, 2018 10:26:09 GMT
The problem is that it takes a lot less time to cut a pair with a pair of tin snips than it would to draw it for a laser to read. I don't know of any firm that would want to waste laser cutting time setting up for a tiny job. We sell them at £28 a pair in 2.5 mm high grade Al. Where do I signe ? |
|
