|
|
Post by Stiggy on Dec 23, 2017 9:34:15 GMT
|
|
|
|
Post by casesensitive on Dec 30, 2017 16:38:46 GMT
hmmm, add that to the wish list
|
|
|
|
Post by kiwicanfly on Dec 31, 2017 4:04:19 GMT
A local (to me) invented a socket wrench that had a trigger on it so you could spin a nut without moving the wrench itself, useful to get nuts on and off when in tight spaces where you could only move, perhaps, a "couple of clicks" on the ratchet.
Trouble is he went mad and when last heard of he was defending himself in court (no layer) which did not go well at all!
|
|
|
|
Post by mawdo81 on Jan 1, 2018 15:11:40 GMT
I was all set to buy one till I saw it’s limited to 25 nm
|
|
|
|
Post by mawdo81 on Jan 1, 2018 15:11:53 GMT
*NM
|
|
|
|
Post by kiwicanfly on Jan 1, 2018 19:49:17 GMT
However, if cheap enough, it will be your best freind on those fasteners in ackward places where you only move the wrench a couple of notches, use a full wrench to get the last bit of tightness.
|
|
|
|
Post by casesensitive on Jan 2, 2018 9:11:23 GMT
Trouble is he went mad and when last heard of he was defending himself in court (no layer) which did not go well at all! Don't they say something like: "the Lawyer who defends himself has a fool for a client"? |
|
|
|
Post by casesensitive on Jan 2, 2018 9:12:12 GMT
I was all set to buy one till I saw it’s limited to 25 nm Effin' boo. That'd be a hard no if so. |
|
|
|
Post by buildityourself on Jan 12, 2018 20:24:12 GMT
Following up on this thread, I found these two versions of this tool in Lidl today for £9.99 each.  They don't have many so if you want one will need to be quick. 2 Sizes, smaller limited to 50NM, larger claims 150NM. I went for the larger with the higher torque, and it felt pretty solid thinking it was 1/2" drive, although I think its actually the size down, but haven't checked in the garage yet. |
|
|
|
Post by casesensitive on Jan 14, 2018 17:38:17 GMT
I was all set to buy one till I saw it’s limited to 25 nm Effin' boo. That'd be a hard no if so. Eric the car guy reviewed the larger one and he quoted quote a high torque figure for it, 250, presumably Nm. |
|
|
|
Post by casesensitive on Feb 5, 2018 11:58:54 GMT
|
|
|
|
Post by snowbird1 on Feb 5, 2018 14:02:55 GMT
 ¿qué?
|
|
|
|
Post by casesensitive on Feb 7, 2018 19:51:18 GMT
¿qué? the first thing in my reply is a link to the product, it's essentially the same idea, but with the added attraction that you can hit it really hard with the persuadertron. Good for dislodging hard-to-reach bolts there's no room to swing at. |
|
¿qué?