500hp..But not a v8! SC k20 build by WheelAlignmentTools.com
Mar 12, 2017 22:25:48 GMT
kiwicanfly, BobN, and 2 more like this
Post by nickmpower on Mar 12, 2017 22:25:48 GMT
Hello all, and welcome to the intro to my build!
Some of the things in store are: custom built supercharger setup, Tilton bottom mount pedals, fuel cell with additional protection, lowered seats, a custom front roll hoop, and just a general attention to detail!
We will make posts here, but where we will really be getting into it is on our blog. We will be posting in depth analysis and detailed explanations on our methods and decisions, as well as giving detailed tutorials on how we accomplished some of our tasks such as building the supercharger/alternator bracket and custom intercooler end tanks. Supercharger bracket post is coming very soon!
Check out some photos below, and here is a link to the blog. You can click the facebook like button to be kept up to date: wheelalignmenttools.com/blog/
Starting point - Here is the donor, though we will end up not using much from it!
%20%7C%20MEV%20OWNERS%20GROUP%20-%20A%20top%20kitcar%20forum%20for%20kit%20car%20builders&txt=This%20image%20has%20been%20reduced%20by%208.7%25.%20Click%20to%20view%20full%20size.http://)
Starting point - Chassis. We got in in bare metal as we will be adding a front roll hoop and a few other things that require welding.
Supercharger/alternator Bracket - We had to make our own bracket as none of the kits available for the k20 would fit in a rwd application.
Some of the things in store are: custom built supercharger setup, Tilton bottom mount pedals, fuel cell with additional protection, lowered seats, a custom front roll hoop, and just a general attention to detail!
We will make posts here, but where we will really be getting into it is on our blog. We will be posting in depth analysis and detailed explanations on our methods and decisions, as well as giving detailed tutorials on how we accomplished some of our tasks such as building the supercharger/alternator bracket and custom intercooler end tanks. Supercharger bracket post is coming very soon!
Check out some photos below, and here is a link to the blog. You can click the facebook like button to be kept up to date: wheelalignmenttools.com/blog/
Starting point - Here is the donor, though we will end up not using much from it!
Starting point - Chassis. We got in in bare metal as we will be adding a front roll hoop and a few other things that require welding.
Supercharger/alternator Bracket - We had to make our own bracket as none of the kits available for the k20 would fit in a rwd application.
