|
Post by Foxy on Feb 24, 2017 14:35:44 GMT
Hiya all,
Just wandered what gear cables are used and where would I get a couple ?
Foxy
|
|
|
Post by mawdo81 on Feb 24, 2017 15:24:39 GMT
I'm using MGF cables, they come as either long or short and a pair is needed for the MGF but we need two long ones. You'll need 4 10mm m6 ball joint sockets and possibly some m6 extensions. casesensitive has a lovely write up. You'll also want to remove the large ball joint on one of the selectors, to do this I used a large ball joint socket and had planned to use it in place of one of the 10mm ones, but it was too tight and pulled the ball off with it. It just so happened that there was a 10mm ball beneath, so it was neutral in the end. Feel free to pop over of I can send you the ball socket if you like? This is with the MTX75 or gertag boxes, if using the IB5 box (which has selector forward of the bell housing) then i believe the original cables suffice.
|
|