|
|
Post by eman on Feb 6, 2017 11:21:13 GMT
As mine was a half started kit, It never came with the bolts to mount the frame. I have had a quick search and cup up with the following: 6 of 12 x 30mm 2 of 12 x 80mm 4 of 12 x 90mm Are these M12 or 12mm? Also I have read they need to be rated 8.8 or higher? Also I am guessing nylocs for all of the above too?  |
|
|
|
Post by eman on Feb 6, 2017 11:33:44 GMT
And I have just answered my own question regarding m12 is 12mm!! I was getting confused with socket size to M12...
Just need someone to confirm that the list is correct and I can get ordering!
|
|
|
|
Post by Stiggy on Feb 6, 2017 11:53:53 GMT
Hi,
Nylock's all round plus 2 washers per bolt and 4 extra washers for between rear subframe and chassis, 26 total washers.
4x30 12mm + 2x40 12mm + 2x80 12mm for front subframe.
4x90 12mm for rear subframe.
6x40 12mm for seat belts.
Dome heads lock neater than cap/allen or hex, BZP not black so they don't rust.
Also see rear subframe tubes, these can be modified to bolt to the tabs at the lower rear of the chassis, drill needed.
Also needed to get started;
4x30 8mm bolts for steering column drop plate and same again for the tank.
1x40mm 8mm with three nuts and washers to replace the lower steering column mount bolt next to the clutch pedal.
8x40mm 8mm for seats mounting with penny washers.
|
|
|
|
Post by eman on Feb 6, 2017 13:02:56 GMT
Excellent, thank you!!
|
|
|
|
Post by tojeiro on Feb 6, 2017 18:38:27 GMT
|
|
