|
Post by Shane on Jun 19, 2016 14:19:02 GMT
Im a long way off but I was just having a read of the IVA and it states that a silencer "MUST" be used?
That seems odd, surely as long as the DB levels are within the limit it should be ok?
Anybody had any experience with this?
I was hoping to fit a new exhaust system from the cat back excluding the silencer.
|
|
|
Post by mathew on Jun 19, 2016 15:19:20 GMT
I'll be amazed if you can get the Db rating below the required reading without a silencer.
Mine failed with silencers fitted.
I ended up fitting to temp baffles/Db killers which brought it just below the limit.
|
|
|
Post by Shane on Jun 19, 2016 15:23:57 GMT
Ah ok, Im planning on taking it down the local exhaust shop to have a custom exhaust fitted so will have to get them to fit a new silencer then to be on the safe side
|
|
|
Post by gwnwar on Jun 19, 2016 21:39:08 GMT
Have them put flanges on the silencer and make you a tube with matching flanges to bolt in later..
|
|