|
|
Post by Shane on Mar 22, 2016 17:21:09 GMT
|
|
|
|
Post by mawdo81 on Mar 22, 2016 18:22:34 GMT
There's a guy selling some of these on Fb with tyres for £300. Worth looking at
|
|
|
|
Post by mawdo81 on Mar 22, 2016 18:26:04 GMT
|
|
|
|
Post by ikarl on Mar 22, 2016 19:03:26 GMT
My wheels are 16x7 with an et15 offset - tyres are 195/45/16 as recommended and they fit perfectly!
|
|
trident
Senior
Improvise, Adapt and Overcome
Posts: 629
|
Post by trident on Mar 22, 2016 20:11:02 GMT
No you will not need spacers. mine are the same size. Photo on my build. mevowners.proboards.com/thread/3878/tridents-exocet-build?page=16Edit: Managed to find this photo which has all the details of my wheels The only thing I needed to do was get a set of 'spigot rings' to reduce the hud size from 73 to the correct size for the MX5 which is 54. That way they were hub centric. The spigot ring size was for my wheels was 73.1 - 54.1  I've just looked at the Facebook one's and they are no good if you don't want spacers. The offset is 38 so you would need spacers. |
|
|
|
Post by ritchie624 on Mar 23, 2016 23:15:24 GMT
Similar to mine going for team dynamics, I'm going with 15,s though.  |
|
|
|
Post by Shane on Apr 14, 2016 19:43:59 GMT
No you will not need spacers. mine are the same size. Photo on my build. mevowners.proboards.com/thread/3878/tridents-exocet-build?page=16Edit: Managed to find this photo which has all the details of my wheels The only thing I needed to do was get a set of 'spigot rings' to reduce the hud size from 73 to the correct size for the MX5 which is 54. That way they were hub centric. The spigot ring size was for my wheels was 73.1 - 54.1 I've just looked at the Facebook one's and they are no good if you don't want spacers. The offset is 38 so you would need spacers. Great news! Good to know I wont need any spacers just spigot rings and thank you for the detailed information its made my decision so much easier  |
|
