|
|
Post by Stiggy on Dec 18, 2009 16:05:50 GMT
Can you spot the 7 differences between the cars in the photo's below, only have one guess each please. Leave some fun for others. Attachments:
|
|
|
|
Post by Stiggy on Dec 18, 2009 16:28:00 GMT
The previous picture Attachments:
|
|
|
|
Post by dinosaurjuice on Dec 18, 2009 17:12:33 GMT
first was before msva, second after. all the u trim is missing....  |
|
|
|
Post by Stiggy on Dec 18, 2009 17:42:44 GMT
Well done Will, you read the photo description "post msva"
Knock on trim gives you 2 points as it's on the wing and side panel. 5 to go chaps. One each please. Kids can join in too.
|
|
|
|
Post by Andy on Dec 18, 2009 18:27:55 GMT
Front lights
|
|
ollieballs
Full
st170 rocket tuned to 200bhp
Posts: 181
|
Post by ollieballs on Dec 18, 2009 19:09:04 GMT
the width of the yellow pinstripe is different
|
|
|
|
Post by nigel on Dec 18, 2009 19:49:14 GMT
Wing Mirrors / Indicators  nigel |
|
mark
Junior
Posts: 51
|
Post by mark on Dec 18, 2009 19:53:38 GMT
The two screws at the front of the bonnet are missing
Mark
|
|
|
|
Post by nigel on Dec 19, 2009 14:50:33 GMT
Come on then Stuart who's right, who's wrong and how many differences still to get. ;D
nigel
|
|
|
|
Post by Stiggy on Dec 19, 2009 16:39:10 GMT
Well done Ollie, I just had to trim those yellow stripes down after we had done the photo shoot with the Nottingham Panthers Ice Hockey team. The picture of the car matching the players kit looked great in the papers though. Well done Andy too. I did move the lights down to make them blend in a little. They are road legal in the lower posoition. Well done Will who noticed the knock on trim to comply with the 2.5mm radius requirement. Well done to Mark who noticed the front bolts. The GRP would have gone flying without those! Nigel cheated and pointed out mirrors AND indicators. Probably an attempt to win. They were one item however I am the judge and I now disqualify Nige for attempting to cheat! I moved the indicators down, again to blend in. These passed the MSVA test but would not pass BIVA as they need to be seen from the sides for the BIVA scheme. Just one to go then,  ?? |
|
|
|
Post by Scott on Dec 19, 2009 17:02:37 GMT
Got it !!!! They are parked in different places,,,,,, What do I Win |
|
|
|
Post by Stiggy on Dec 21, 2009 8:09:19 GMT
No lollipop for you Scott, soory. Imagine your a BIVA inspector looking at all the nuts and bolts.
|
|
|
|
Post by Stiggy on Dec 22, 2009 18:32:16 GMT
One day to go, will close competiton on Wed. A BIVA inspector fails cars with nuts on show as they need to have a 2.5mm radius to pass. How's that for a clue.
|
|
|
|
Post by r16 on Dec 22, 2009 18:34:22 GMT
is it nut covers by chance? :-) |
|
|
|
Post by Stiggy on Dec 23, 2009 11:34:31 GMT
Well done Phil, thats the lot. Hope the competition was of help with regards to BIVA/MSVA requirements.
Happy Christmas everyone, regards Stiggy
|
|
??
