|
|
Post by mawdo81 on May 8, 2015 16:46:16 GMT
Not sure on scale, is fog > 100mm from stop and >250mm from floor with fuel and driver?
Others need to be <400 from outside edge and >350 mm from floor with fuel and driver.
|
|
|
|
Post by casesensitive on May 9, 2015 10:36:40 GMT
|
|
|
|
Post by mawdo81 on May 9, 2015 10:52:32 GMT
It's an Exocet cases sensitive, engines at the wrong end ;-)
It is a great build they have, some lovely carbon work.
|
|
|
|
Post by Paul (madeye) on May 9, 2015 11:01:54 GMT
Yeah, but the dimensions must be the same for all Iva surely :-)
Thanks, that's spot on.
I'll print that off
|
|
|
|
Post by Stiggy on May 9, 2015 11:24:12 GMT
Yeah, but the dimensions must be the same for all Iva surely :-) Thanks, that's spot on. I'll print that off Please check they are right Paul by looking at the manual. The text "400 separation from stop" could be incorrect. There is a rule that states the fog must be a minimum of 100mm from the stop light. |
|
|
|
Post by Paul (madeye) on May 9, 2015 11:27:56 GMT
Thanks Stuart, once I get to my printed manual at work I can check . Scrolling through on an electronic document hurts my bloody eyes.
|
|
|
|
Post by mawdo81 on May 9, 2015 19:20:37 GMT
My post was right re dimensions, taken from the manual. John has subsequently updated his diagrams from 400 to 100.
Yes the dimensions are the same I was just pointing out that it's not a sonic being built, just because it's not, not because it had a bearing on the topic under discussion, sorry if that caused confusion.
|
|
|
|
Post by mawdo81 on May 9, 2015 19:21:40 GMT
Thanks Stuart, once I get to my printed manual at work I can check . Scrolling through on an electronic document hurts my bloody eyes. I was going to do that but at c400'pages it's a beast and it doesn't have page numbers! At least the PDF links from the contents page. |
|
|
|
Post by mawdo81 on Oct 20, 2015 6:56:21 GMT
Hey Paul,
All quiet? How's the build going? Or are you having too much fun with your CNC machine?
|
|
|
|
Post by Paul (madeye) on Jul 22, 2016 12:34:19 GMT
I'm back...
More to come.
|
|
|
|
Post by BobN on Jul 22, 2016 14:04:45 GMT
Been a very long time. Where have you been mate.
|
|
|
|
Post by jacksdad on Jul 22, 2016 16:00:42 GMT
cool
|
|
|
|
Post by Paul (madeye) on Jul 22, 2016 16:29:26 GMT
Been a very long time. Where have you been mate. i wont bore you with detail, but im back to the build. just need to remember where im at now.. |
|
|
|
Post by Paul (madeye) on Aug 8, 2016 21:26:14 GMT
so in my quest to get started, i have gone backwards, stripped out the handbrake system and pulleys and the fuel system over the weekend.
i dont know what i was thinking on the fuel overspill return from the swirl pot, but i have clarity now
|
|
|
|
Post by casesensitive on Aug 9, 2016 17:49:32 GMT
so in my quest to get started, i have gone backwards... Sounds familiar. Despite making big strides, I may be, in many ways, further from finished than I was a year ago. The list of jobs has definitely gotten longer. |
|
