|
|
Post by barry on Apr 9, 2012 8:01:19 GMT
Does anybody have close-up pictures of the fitment of the front bonnet. I'd like to see how the front catches on the grille side are manufactured. Thanks so much guys.
|
|
|
|
Post by avantkiwi on Apr 9, 2012 18:34:31 GMT
Will try and dig mine out and post.
In a basic form, manufacture a flat bar to be stuck under the bonnet with a protruding lug of around 4cm on each side.
Then cut matching grooves into the front/body to take the bar.
|
|
|
|
Post by andybaird on Apr 9, 2012 19:01:38 GMT
Hi This is a photo off the bonnet fitment I made for mt Sonic.  Hope this helps Andy |
|
|
|
Post by barry on Apr 14, 2012 13:27:15 GMT
Thats perfect. Thanks very much.
|
|
