|
Post by edwinwl on Jul 10, 2011 18:10:03 GMT
I am waiting for parts to arrive, so I started on the wire loom. Made a drawing of original plan and how it should be modified: Red lines are new wires, black lines are existing wires.
|
|
|
Post by edwinwl on Jul 10, 2011 18:12:12 GMT
Plan is to place the computer, fuses and relays high up at the passengers side leg space. Battery will be placed front in of the passenger legspace.
|
|
|
Post by edwinwl on Jul 10, 2011 18:18:01 GMT
Suggestions please!
|
|
vtR1k
Full
I'm a trike lover...
Posts: 398
|
Post by vtR1k on Jul 11, 2011 8:45:39 GMT
I left te wiring pretty intact, only added some relays and some applications (fuel gauge, pumps etc). Didn't think about the placement of everything yet... Except for the pumps and fuel gauge sender...
|
|
vtR1k
Full
I'm a trike lover...
Posts: 398
|
Post by vtR1k on Jul 11, 2011 9:12:21 GMT
Maybe an idea: for placing the heavy parts (battery, regulator etc) it might be advidsable to check the weight balance of the trike... The optimum balance should be 33% on each wheel (including driver). In that case I think most of the heavy stuff should be mounted right front (for LHD-models).
|
|
|
Post by edwinwl on Jul 11, 2011 10:33:27 GMT
It does....
|
|