Post by Tim Kerr on Jun 18, 2011 18:42:17 GMT
Anyone know where I could get a one of bit of machine work done that's relatively cheap?!
Looking at getting a custom made thermostat out of billet Ali but without the heater outlets. I am also not running the thermostat so should be a straight forward bit of work. I can also get it drawn up in autocad if necessary.
I am using this setup in conjunction with a Davis Craig pump.
Tim
Looking at getting a custom made thermostat out of billet Ali but without the heater outlets. I am also not running the thermostat so should be a straight forward bit of work. I can also get it drawn up in autocad if necessary.
I am using this setup in conjunction with a Davis Craig pump.
Tim
