ashg
Newbie
Posts: 3
|
Post by ashg on Mar 7, 2011 10:27:06 GMT
Hey Guys
My Name is Ash Just signed up to the forum. I write for CKC magazine. last year i built a Haynes roadster from scratch, with that finished i needed another car to build. Spoke to stuart ordered an Exocet the rest is history. Obviously writing for CKC you can expect to see my build progress updated every month in the magazine, if you guys have any tips/suggestions that will help with the exocet build then they would all be greatly appreciated
|
|
|
Post by squelch on Mar 7, 2011 13:04:24 GMT
hi ash welcome to the forum, ill keep an eye out for the build in ckc off the top of my head be prepared to replace the original bottom arm adjusted bolts and a few others as they have a habit of snapping when being undone. I'll think of more during the day lol
|
|
mattsmev
Senior
It's only Rocket science...
Posts: 726
|
Post by mattsmev on Mar 7, 2011 20:49:35 GMT
Welcome Ash
I subscribe to CKC and rate it highly as a mag. I loved the last car you built and look forward to reading about the Exocet build. I am sure the Exocet chaps will give you any advice you need, perhaps you can 'big up' the forum in your articles if you find it useful. I think it's a big plus of the MEV experience.
Cheers and welcome
Mattsmev
|
|
|
Post by alan87 on Mar 8, 2011 18:30:14 GMT
Hi Ash,
I am currently dismantling an mx5 for an exocet as we speak. I saw you were going to be building one, so will be looking forward to getting the mag each month to see how your getting on. There is some great people on these forums, who are more than willling to help, Good to see you on here and good luck with the build.
Alan
|
|