ianh
Newbie
Posts: 6
|
Post by ianh on Sept 23, 2020 11:38:52 GMT
Afternoon all. Having searched through the build threads, I can't spot my problem. I have tried to fit the rear wing stay. I have drilled the 8mm hole, but where the longer caliper bolt goes through isn't touching the hub. Can anyone spot what I have done wrong please? Ian
|
|
|
Post by hutchey on Sept 23, 2020 12:40:04 GMT
What do you mean? Isn't touching the hub?
|
|
ianh
Newbie
Posts: 6
|
Post by ianh on Sept 23, 2020 15:46:18 GMT
Yes, wording wasn't great! There is a gap between my wing stay and where the caliper bolt goes in. Surely they should be flush together?
|
|
|
Post by hutchey on Sept 23, 2020 15:49:23 GMT
just pack it with washers
|
|
ianh
Newbie
Posts: 6
|
Post by ianh on Sept 23, 2020 17:51:11 GMT
Thank you, just keen to know Why. Cant see that done in other photos so wondered if my hubs were different.
|
|
|
Post by hutchey on Sept 24, 2020 7:53:08 GMT
Think mine might be the same
|
|