|
|
Post by Shane on Oct 15, 2017 13:33:20 GMT
|
|
|
|
Post by freshp5 on Oct 15, 2017 14:29:16 GMT
What you do about wheels mate
|
|
|
|
Post by Shane on Oct 15, 2017 15:07:23 GMT
What you do about wheels mate They will be fine mate, even thought the alloy is an inch bigger the lower profile tyre compensates:  [/url] |
|
|
|
Post by freshp5 on Oct 15, 2017 15:10:10 GMT
Thought the speedometer will be out that’s what other people have toll me
|
|
|
|
Post by Shane on Oct 15, 2017 15:12:42 GMT
Look at the results I got from the Tyre comparison, there is hardly any difference as the overall size is more or less the same, there would be more difference comparing a new tyre and a worn tyre.
Also been told its better to be slightly over than under and my results are 0.6mph over at 70mph and 0.3mph at 30mph so im not worried about it.
|
|
|
|
Post by miket on Oct 15, 2017 16:23:37 GMT
Looks great Shane.
A couple of things to check whether can be touched by the IVA sphere?:-
* Bottom of springs
* Rear of chassis tubes - at side above exhaust
* Front flexi brake hose bracket
* White upright side-panel supports in cockpit
|
|
|
|
Post by Shane on Oct 15, 2017 17:08:21 GMT
Looks great Shane. A couple of things to check whether can be touched by the IVA sphere?:- * Bottom of springs * Rear of chassis tubes - at side above exhaust * Front flexi brake hose bracket * White upright side-panel supports in cockpit Thanks miket, I have white rubber on end of chassis tubes at the rear. Flexi hose brackets have trim on. Will add trim to white panel supports and bottom of springs to be sure! Thanks mate |
|
|
|
Post by p2tav on Oct 15, 2017 22:29:53 GMT
looking Good Shane, good luck i hope all goes well  |
|
|
|
Post by gwnwar on Oct 15, 2017 22:38:11 GMT
From pic of right/driver front the head lamp unit looks tilted down toward the side beam lines not level..
Might be just the pic. Have you had the headlamps adjusted at shop..Take copy of tire speed difference with you can't hurt
lots of paper neatly put together.. Car really look great easy on the eyes.. Good luck on the IVA test..
|
|
|
|
Post by Shane on Oct 16, 2017 7:43:32 GMT
From pic of right/driver front the head lamp unit looks tilted down toward the side beam lines not level.. Might be just the pic. Have you had the headlamps adjusted at shop..Take copy of tire speed difference with you can't hurt lots of paper neatly put together.. Car really look great easy on the eyes.. Good luck on the IVA test.. It does look tilted, will check this! They should be OK as these headlights have passed 2 other cars already. (Dave and stes mevsters) And good idea regarding the comparison never thought of adding it to the pile of papers  |
|
|
|
Post by kiwicanfly on Oct 16, 2017 7:58:43 GMT
Also been told its better to be slightly over than under and my results are 0.6mph over at 70mph and 0.3mph at 30mph so im not worried about it. Is the chart not telling you that at a speedo reading of 70mph you will actually be travelling at 70.6mph thus are travelling faster than you think? In reality you should have a true speed slightly lower than your speedo reading. However I am sure the error is not worth worrying about. |
|
|
|
Post by Shane on Oct 16, 2017 8:01:27 GMT
Also been told its better to be slightly over than under and my results are 0.6mph over at 70mph and 0.3mph at 30mph so im not worried about it. Is the chart not telling you that at a speedo reading of 70mph you will actually be travelling at 70.6mph thus are travelling faster than you think? In reality you should have a true speed slightly lower than your speedo reading. However I am sure the error is not worth worrying about. That's what I've been told, no car will ever read exact as low/high tyre pressure and worn/new tyres will all have variances. Cheers kiwi |
|
|
|
Post by gwnwar on Oct 16, 2017 16:08:42 GMT
Shane.. I don't know the rules on repeaters in UK.. Are they only to shine to the back like yours or to the side too??
All I have seen shine to both??
|
|
|
|
Post by Shane on Oct 16, 2017 16:18:59 GMT
Shane.. I don't know the rules on repeaters in UK.. Are they only to shine to the back like yours or to the side too?? All I have seen shine to both?? These are the 4th set of side repeaters Iv tried to meet the requirements, dont wind me up lol  According to the IVA manual they should be fine, the test they do is measure 45cm or so out to the side and then 5m back, as long as they can be seen anywhere within that area your good:  |
|
|
|
Post by gwnwar on Oct 16, 2017 16:25:38 GMT
Shane.. Thanks for the fast reply and info..
|
|
