|
Post by skyrangerman on Mar 17, 2015 22:31:24 GMT
Hi all,
Still cannot get my RPM to read right, I connected my RPM black wire to one of the coilpack plug wires, the one nearest to the cylinder head, left one as you look at the coil pack plug, currently have the PPR setting on 2 and it still reads double the RPM of the engine, it overeads worse on PPR 1 and worse still on 0.5.
Any help would be greatly appreciated.
Thanks John.
|
|
|
Post by mawdo81 on Mar 18, 2015 7:00:17 GMT
Can you set it to 4?
|
|
|
Post by skyrangerman on Mar 18, 2015 22:27:16 GMT
Thats the problem,
It only has 0.5, 1 & 2 .
Any one have any ideas, may be someone who has one on a zetec.
John.
|
|
|
Post by nigel on Mar 20, 2015 13:11:09 GMT
skyrangerman.. Old issue problem this one. Check out the following 'Tech Section' thread might help (link)
nigel
|
|