|
|
Post by bossman on Jan 18, 2013 16:53:56 GMT
Iv'e had a anoying squeak from around the auxilary belt area on my 1.8 zetec and after removing the idle rollers the bearings are worn and noisy and being a tight yorkshireman i'm not prepared to pay ford £100 + to replace them, wondered if it's possible to replace just the bearing and as anybody tried it?
|
|
|
|
Post by airforceone on Jan 18, 2013 17:02:22 GMT
You can get the idle wheels from Burton power and on Ebay. Defo cheaper than £100.
I bought one from Burton the other from Ebay total cost was about £50. You might get them
cheaper now.
|
|
|
|
Post by bossman on Jan 18, 2013 17:15:33 GMT
Thanks For that, when i say £100 i'm meaning replacing all 3 inc adjuster one, it just seems a shame to have to replace it just because of the bearing .
Can't do with the throw away society
|
|
|
|
Post by Paul (madeye) on Jan 26, 2013 22:04:28 GMT
Im with you john, im a tight yorkshire man too
|
|
