|
|
Post by scooby1929 on Jul 16, 2012 17:00:36 GMT
As i have taken the clutch out for inspection i noticed some wear on the fingers. Can anyone recommend a decent one?
|
|
|
|
Post by freshlikesushi on Jul 16, 2012 17:12:09 GMT
stock engine?
stock clutch
anything else?
exedy
|
|
|
|
Post by scooby1929 on Jul 16, 2012 21:52:08 GMT
Well my plan is to try it first stock then fit last years xmas prezzie a jackson supercharger kit. was looking at the exedy clutches. thanks for the help
|
|
|
|
Post by freshlikesushi on Jul 17, 2012 0:40:28 GMT
i love my exedy clutches. i put them in everything. even my v8 has one
|
|
|
|
Post by gwnwar on Jul 17, 2012 4:43:27 GMT
+1 on the Exedy unit.. hold up good even with 10psi supercharger..
|
|
|
|
Post by freshlikesushi on Jul 17, 2012 17:17:07 GMT
and 230 hp turbo setup.
|
|
|
|
Post by calla on Jul 18, 2012 20:11:42 GMT
iv just fitted the standard exedy clutch it was only a £110 and seems very good quality! Iv not ran the engine yet but im not expecting any problems especially considering the weight of the exocet
|
|
|
|
Post by scooby1929 on Jul 19, 2012 19:13:11 GMT
Where did you get it from at that price.
|
|
|
|
Post by calla on Jul 23, 2012 11:14:45 GMT
|
|
|
|
Post by scooby1929 on Jul 23, 2012 12:21:29 GMT
I am not sure to reuse my clutch or not there is loadsof meat left on it but a few marks on the fingers. As you say its going to be a lot lighter the exocet so the clutch wont have to work as hard
|
|
