|
|
Post by scooby1929 on Jul 5, 2012 12:28:48 GMT
Guys what would be a good paint for wishbones, subframes etc. I have never liked hammerite
|
|
|
|
Post by driver on Jul 5, 2012 18:54:54 GMT
What dont u like about hammerite?
|
|
|
|
Post by John B on Jul 5, 2012 19:27:25 GMT
Powder coating for the big stuff but you will still need paint for certain other bits. I used Hammerite smooth which went on really well. I much preferred it to the spray Hammerite.
|
|
|
|
Post by adam1001 on Jul 6, 2012 0:30:31 GMT
You'll never get a good finish without blasting and powder coating. I had subframes, wishbones, roll bars and droplinks done, you can get away with painting the rest. Make sure you mark all the bits to be blanked off (any threads and where the bushes go) - although the powder coater complained how long it took him it would have taken me four times as long to clean it all off.
|
|
|
|
Post by freshlikesushi on Jul 6, 2012 8:26:30 GMT
powdercoat on teh subframes and arms. everything else sandblast, spraypain primer and then spraypaint
|
|
