Post by xvanwaart on Jan 1, 2012 17:03:31 GMT
Hi all, when splitting top from bottom yesterday I found it rather hard to find all the right bolts to unscrew... perhaps something to point out more clearly in the manual... This is what I found on my MX-5 NB model:
On the front side there are 8 bolts connected to the engine bay and 4 bolts keeping the roll bar in place (red) and the springs (yellow).
On the rear side there are 6 bolts attached to the rear subframe which are extremely hard to undo an 2 bolts attached to another bar (red) and again the spings in yellow.
Contrary to what the manual said there was no speedometre cable attached to the gearbox which needed to be undone...
Hope this helps somebody!
On the front side there are 8 bolts connected to the engine bay and 4 bolts keeping the roll bar in place (red) and the springs (yellow).
On the rear side there are 6 bolts attached to the rear subframe which are extremely hard to undo an 2 bolts attached to another bar (red) and again the spings in yellow.
Contrary to what the manual said there was no speedometre cable attached to the gearbox which needed to be undone...
Hope this helps somebody!