Wheel Arch Stays

[slosean]

Greetings,

Question for UK Exocet owners, how do you like your MEV wheel arch stays?

shop.mevltd.co.uk/collections/exocet-kits-and-parts/products/wheel-arch-stays

I am looking to add fenders to my US spec Exocet. Our options are limited to the Exomotive offering, which don't have a great reputation, or an aftermarket solution that is very well done but fairly expensive. I'm thinking these might be a good option and even with international shipping still less than half the cost of the aftermarket solution (I already have GRP fenders).

[themorgster]

They are ok if you are running very close to stock circumference wheels, some people have had lengthen them with larger wheels & tyre combo’s. I’m running 205/50 R15 tyres and they just fit. Also probably best not to bother with the powder coat. If you have to bend them at all to get them in the right position, it cracks and flakes off - as you would expect.

[slosean]

Thanks for the feedback!  I too am running 205/50/ 15 so I should be in good shape.  I think I'm going to give them a go and see how they work out. 

[Stewart]

We can also make them to fit larger profile wheels. It’s just repositioning the uprights when making them.