|
|
Post by scooby1929 on Aug 8, 2019 18:44:18 GMT
Anyone fitted a proper screen on the Exo. Thinking of fitting one and replacing the fly screen
|
|
|
|
Post by kiwicanfly on Aug 9, 2019 7:31:32 GMT
The "proper screen" surely is the flyscreen.
|
|
|
|
Post by scooby1929 on Aug 9, 2019 10:21:29 GMT
A proper screen is one where a stone can't hit you on the face. Fly screens are good but don't offer much protection
|
|
iain64
Junior
Awaiting the arrival of the Rocketeer kit. So excited
Posts: 31
|
Post by iain64 on Aug 9, 2019 18:21:22 GMT
 Get a pair of these. Full protection and cheaper than a large screen  |
|
|
|
Post by gt3m3 on Aug 17, 2019 16:04:30 GMT
 I forget the details but ended up with a 5.75mm thick single sheet Lexan brand polycarbonate that was rated more durable. I tried a thinner piece but it was too flexible. I used 6 GS power’s wide tube mounts and added a thin layer of rubber gasket. The upper edge is not mounted But only slightly flexes at 118mph. There is no annoying vibration. I did have to narrow the lower sides slightly follow the frame tubes. |
|
|
|
Post by miket on Aug 17, 2019 16:36:08 GMT
There was a thread on here somewhere, from Stuart (MEV) I think, about using a MGB(? or similar) screen
|
|
|
|
Post by eddie111s on Aug 26, 2019 17:05:51 GMT
I have an idea to use a classic mini screen and the complete front frame. Maybe chop the screen and cut an weld the frame to match   |
|
