|
|
Post by adrianreeve on Jul 11, 2019 17:38:41 GMT
Enjoying the strip down of our donor in very cramped conditions (sharing garage space with our VW camper!), but have come across a problem - how do the driveshafts come out? Haynes manual says puller for one end and simply prise from the diff end - I cant manage either! Is there a knack to this?!
Cheers
Asrian
|
|
|
|
Post by Stiggy on Jul 11, 2019 22:04:31 GMT
why are you taking them out?
|
|
|
|
Post by adrianreeve on Jul 12, 2019 11:06:22 GMT
A couple of split boots to replace
|
|
|
|
Post by Stewart on Jul 12, 2019 12:14:10 GMT
Most people leave them in but if you need to replace the boot, heat, press, bigger hammer.
If they don't come out with a little persuasion, it's going to be easier to replace them. Some just drop out, others have had 20-30T of pressure to pop them
|
|
iain64
Junior
Awaiting the arrival of the Rocketeer kit. So excited
Posts: 31
|
Post by iain64 on Jul 12, 2019 17:54:40 GMT
Mine came out dead easy. To pop them out from the diff just place a large screwdriver in between the diff and the shoulder on the end of the shaft and just pop it out
|
|
