led turn signals exocet

[bhad]

I am in the process of installing led turn signals.

I tried one in the rear and it wasn't playing nicely.

So I ordered these.

>4 x 50W Load 6 ohm Resistors LED Bulb Fast Hyper Flash Turn Signal Error Blinker<

I have hyper flash with nothing in the sockets and wiring unmolested.

the led lights are a 3 wire light. I am unsure if I have to use both light sockets in the front corners. I would like to only use one.

I hope that this isn't a copy thread. I couldn't find one. So I will post more about what I learn during this nightmare!

And any all help would be greatly appreciated.

I will post pics as necessary or requested.

[buildercg]

I had the same problem. I tried adding inline resistors: with my '92 donor the extra resistors were not effective; plus they get VERY hot VERY fast.

I solved the problem by modify the flasher unit. This solution worked for me. 

[bhad]

Thank you buildercg. This is going to help me out.

[bhad]

[bhad]

[bhad]

[bhad]