|
|
Post by sammy on Mar 5, 2015 11:28:24 GMT
Thanks guys. This morning I started the gas pedal,style Joker. (Hope that do not take it bad that it copied.  ) and promptly an error in profil.maybe was too early today.... My objective and make aluminum , but without welding the pedal as that of steel. let's see what comes out.  |
|
|
|
Post by sandancer73 on Mar 5, 2015 12:30:42 GMT
Very neat and tidy. Good work Sammy.
|
|
|
|
Post by daydreamer on Mar 5, 2015 19:31:48 GMT
I recognise this work combines aspiration with skill and determination. I respect your direction and look forward to your communications.
It makes an example of what can be achieved
Thank you.
|
|
|
|
Post by sammy on Mar 5, 2015 21:10:04 GMT
Tank you.
My motto is : nothing is impossible.
Seriously now : I believe I can achieve a result Satisfactory.
Although I must admit that my project cost me much time of normal.
|
|
|
|
Post by sammy on Mar 12, 2015 18:32:11 GMT
Today I have the wheel nuts gotten. the color I do not like so much. Blue would have been better. What A Shame... |
|
|
|
Post by mawdo81 on Mar 12, 2015 19:17:51 GMT
If you don't like them I'll give them a good home ;-)
|
|
|
|
Post by sammy on Mar 15, 2015 14:46:44 GMT
Gas pedal is now finish.i think is good. It should also be stable enough. |
|
|
|
Post by hightower on Mar 15, 2015 19:26:57 GMT
Some seriously stunning looking parts mate if the cost wasn't involved I'm sure many builders would be swapping there's for yours, keep up the good work mate its a pleasure to see.
|
|
|
|
Post by sammy on Mar 15, 2015 21:09:36 GMT
Here in the forum are many beautiful Rocket. Everyone is a single-item way every builder has used his idea.You are an example mate with your Rocket zx10-r  This provides much inspiration. |
|
|
|
Post by casesensitive on Mar 19, 2015 9:13:50 GMT
Parts back from anodized Now this one better. Unbelievable what some may represent color. I've never been more ashamed of my steering column extension work. Incredible quality. |
|
|
|
Post by mawdo81 on Mar 19, 2015 12:09:23 GMT
How much for a Sammy steering column extension?
|
|
|
|
Post by jfrench78 on Mar 24, 2015 19:03:20 GMT
You could go for Inconel for the Exhaust. With it's properties you can make it super thin.
Also if you are going to the extremes on the bolts what about butted ones. If such a thing exists outside bike parts.
|
|
|
|
Post by sammy on Mar 24, 2015 19:40:46 GMT
This morning I started steering arm.I tried it with the drill but that titanium and so hard that I broke two cutters...in the end I could spark erosion and ed lasted about 6.5 hours 
|
|
|
|
Post by sammy on Mar 24, 2015 21:08:22 GMT
I have already a exhaust manifolds for e30 m3 titanium construction.The thick was 1mm.Inconel is better than titanium , but almost impossible to get a plate.
|
|
|
|
Post by sammy on Mar 25, 2015 11:28:52 GMT
After the yesterday evening I 've programmed the machine,has finally come. All together,the machine 14 hours needed. But I am very happy of the same result. It all fits very good.so I could leave out the Stainless inserts,because the cone is cut directly to the part Now just bolting and ready.  |
|
)
