olberj
Full
SC Rocketeer
Posts: 150
|
Post by olberj on Jun 13, 2020 20:00:49 GMT
SOLD!
|
|
olberj
Full
SC Rocketeer
Posts: 150
|
Post by olberj on Jun 13, 2020 12:25:19 GMT
Hi folks. Have my Powerworks supercharger kit up for sale if anyone is interested. All details on the fb post here : www.facebook.com/marketplace/item/2656186584658097/Full kit with rebuilt charger and big injectors, dreamscience etc. £2,000 for the lot. Was on my rocket classic (MevST's old car). Going itb's instead. Any questions, let me know. Cheers, Olie
|
|
olberj
Full
SC Rocketeer
Posts: 150
|
Post by olberj on Sept 7, 2017 19:00:40 GMT
Dry sky, wet floor. Turn through a puddle and you get proper wet!
I've got tarpauline to try out, stretched round the sides and tied with rope is the plan.
|
|
olberj
Full
SC Rocketeer
Posts: 150
|
Post by olberj on Jul 22, 2017 6:31:39 GMT
Cheers. Right sized washers shouldn't be too much of a struggle. I'll measure up and see what i can find.
|
|
olberj
Full
SC Rocketeer
Posts: 150
|
Post by olberj on Jul 21, 2017 16:53:16 GMT
Something we noticed when setting up the alignment on my rocket, the wishbone bushings don't move freely.
The clamp of the nut and bolt mean that it binds slightly.
What does everyone else do?
Leave them ever so slightly slack?
Fit longer tubes inside the bushes?
It's not a deal breaker but I'd like to get it right.
|
|
olberj
Full
SC Rocketeer
Posts: 150
|
Post by olberj on Jun 26, 2017 19:01:11 GMT
|
|
olberj
Full
SC Rocketeer
Posts: 150
|
Post by olberj on Jun 22, 2017 7:26:10 GMT
You guys with yer sexy double roll hoops. Very jealous!
I've got a set of 15" cxr's to fit with r888s. Not a big fan of the larger wheels.
|
|
olberj
Full
SC Rocketeer
Posts: 150
|
Post by olberj on Jun 16, 2017 19:44:34 GMT
|
|
olberj
Full
SC Rocketeer
Posts: 150
|
Post by olberj on May 31, 2017 7:54:13 GMT
Does it have a separate connector for the laptop or does it use the obd2 port?
I was thinking of either extending the obd2 to under the dash or a decent bluetooth reader.
|
|
olberj
Full
SC Rocketeer
Posts: 150
|
Post by olberj on May 29, 2017 14:23:55 GMT
Nice one. You'd recommend the ME221 then? Are you tuning it yourself?
I've been looking at the plug n play loom package to run my SC'd ST170.
|
|
olberj
Full
SC Rocketeer
Posts: 150
|
Post by olberj on Apr 9, 2017 15:46:07 GMT
Through the group i run we like to make a few fun videos. We made this for my mate Johnny before he sells off his 993 Turbo.
Rocket content as i use it to try and chase him down.
Enjoy, it's rather light hearted :
|
|
olberj
Full
SC Rocketeer
Posts: 150
|
Post by olberj on Apr 2, 2017 15:30:37 GMT
Yeah, got the 888s to try out soon. The t1rs are ok in the bone dry but nothing special. Was concerned about the 888s in the wet but not sure they'd be much worse than the t1rs. My mate's doing the rev limits night next Wed in his 620r, tempted to go play but it's £150 as they keep numbers to 25. It'll definitely see the track though, possibly a hill climb or 2. Kames would be a hoot.
|
|
olberj
Full
SC Rocketeer
Posts: 150
|
Post by olberj on Apr 2, 2017 15:16:27 GMT
Thanks folks.
|
|
olberj
Full
SC Rocketeer
Posts: 150
|
Post by olberj on Apr 1, 2017 19:03:15 GMT
It was more the angle of the reg plate. I understand it's supposed to be vertical or as close to as possible.
|
|
olberj
Full
SC Rocketeer
Posts: 150
|
Post by olberj on Apr 1, 2017 8:04:52 GMT
I have my own personal plate that I've just assigned to the Rocket.
The rear will be fine but the front currently is a square 2 row job stuck to the bonnet. It may cause issue for mot on the front like that and i want to go back to a single row anyways.
Post mot, how many of you run without a front plate or have a smaller plate fitted vertically?
Last thing i want is rad air flow obstruction so will be there for mot only.
|
|