fatboy
Full
142.5 bhp on a almost stock 1.8
Posts: 197
|
Post by fatboy on Jul 8, 2012 20:50:12 GMT
|
|
fatboy
Full
142.5 bhp on a almost stock 1.8
Posts: 197
|
Post by fatboy on Jul 17, 2012 20:07:19 GMT
Well of to R.T.R on friday for iva check and test lets hope
|
|
|
Post by Paul (madeye) on Jul 22, 2012 21:16:57 GMT
i saw your car at rtr today mate when i went to collect my kit, beautiful detail. very nice looking car.
paul
|
|
fatboy
Full
142.5 bhp on a almost stock 1.8
Posts: 197
|
Post by fatboy on Jul 23, 2012 15:10:53 GMT
thanks very much lets hope it passes with out to many probs
|
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 12, 2012 18:19:29 GMT
Good luck looks a good build !
|
|
fatboy
Full
142.5 bhp on a almost stock 1.8
Posts: 197
|
Post by fatboy on Aug 16, 2012 17:13:09 GMT
Phone call from paul car tested on a cancellation failed first time on a couple of bits but passed second go WHOOOOOOOO ;D THE FATBOY WILL BE AT DONNINGTON WITH ANY LUCK
|
|
|
Post by airforceone on Aug 16, 2012 17:45:55 GMT
Congratulations on the Pass.
Had a wee look round your car on Tuesday when I was dropping mine off. Very nicely finished, good work, just need some nice weather now so you can give it a good test drive.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 16, 2012 18:26:28 GMT
Awesome;) next stop dvla !!
Do you mind if I ask what the small points were? Just radius's?
|
|
|
Post by mabbs on Aug 16, 2012 18:36:20 GMT
Great news - another Rocket on the road Donnington is looking to be a great weekend ;D
|
|
fatboy
Full
142.5 bhp on a almost stock 1.8
Posts: 197
|
Post by fatboy on Aug 16, 2012 20:35:49 GMT
Hi steve the main fail was i bolted rose joint to aluminium side panel for steering it was solid But i think he was in a a#&ey mood so rtr made a bracket then with my speedo mounted In the cent re he said the radius wasn't right and he managed to fit the 100mm ball on the offside rear near the flywheel and found a sharp edge . But after all that he said it was a good build
|
|
|
Post by Froggy on Aug 17, 2012 10:03:37 GMT
Nice one mate and congratulations. cant wait to see it at donny. Wayne.
|
|
|
Post by BobN on Feb 1, 2013 14:28:14 GMT
Hi Fatboy
I believe you used a mechanical brake switch on the Wilwood pedals, I want to do something similar. By any chance can you post a picture of how you did it?
If anyone else has done this please feel free to reply.
Thanks Bob
|
|
fatboy
Full
142.5 bhp on a almost stock 1.8
Posts: 197
|
Post by fatboy on Feb 1, 2013 16:52:32 GMT
hi bob i used a hydraulic switch connected into my rear brake pipe through a t piece and it sailed through the iva no problem
|
|
fatboy
Full
142.5 bhp on a almost stock 1.8
Posts: 197
|
Post by fatboy on Feb 1, 2013 16:55:31 GMT
sorry i forgot to add look at picture 20 on page 1
|
|