|
Post by stevednorris on Oct 25, 2017 8:13:31 GMT
Hi Andy, it was dead easy, I used the standard wiring and sensor.
|
|
|
Post by ancsportscars on Oct 25, 2017 9:57:20 GMT
That's good to know. No faffing about with daisy wheels/magnets etc. May have to look into as a possible for my demonstrator when at that stage. I'll put a link on my website for future builders to refer to, anyway. Like the seats too. Got any more detailed pics? I'm guessing they were by Interiors Seating? (same as on Stuart's red demonstrator?)
|
|
|
Post by stevednorris on Oct 29, 2017 11:37:53 GMT
Sorry for the late reply, been away for a few days. I can take pics, anything in particular?
|
|
|
Post by ancsportscars on Oct 29, 2017 22:29:58 GMT
Sorry for the late reply, been away for a few days. I can take pics, anything in particular? One or two of the seat itself from the front and showing the height of the seat back in relation to the rear bulkhead, would be good.
|
|
|
Post by stevednorris on Oct 30, 2017 13:42:51 GMT
I’m away with work for a couple of days but should be able to get some on Thursday.
|
|