|
Post by greyreplicar on May 11, 2015 11:05:35 GMT
|
|
|
Post by greyreplicar on May 11, 2015 11:09:12 GMT
Managed to get alloys from an MG ZR, had them powder coated and new rubber put on them Will use these to get through the SVA however I have managed to source 16" wires for the final period look.
|
|
|
Post by alanc on May 16, 2015 9:07:33 GMT
Hi
Where have you sourced the 16" wires & how are they going to be fitted to the Mazda hubs ? I gave up on this idea. Maybe I should have done more research before choosing Weller roadsports as an easy option.
|
|
|
Post by greyreplicar on May 17, 2015 14:15:43 GMT
Hi Where have you sourced the 16" wires & how are they going to be fitted to the Mazda hubs ? I gave up on this idea. Maybe I should have done more research before choosing Weller roadsports as an easy option. I got in touch with MWS who make the 15" bolt on and they said they could do the MX5 configuration as a 16" special order. I think once the word spreads though it may become a permanent option on their website. There is plenty of clearance on the body and frame however I think it may be close to the lower wishbone with the tyre. Will probably get it through the IVA on original wheels then change them over.
|
|
|
Post by R2S on May 17, 2015 17:12:49 GMT
If you are going for the period look are you going for narrower wheels? Vredestein Classics at 80 profile say 185 or narrower on a 6J wheel?
|
|
|
Post by greyreplicar on Nov 22, 2015 16:32:03 GMT
Hi, could anyone point me in the direction of the buttons required on the dash for the SVA (other than what is on the steering column of course!) I know I need the hazard and fog light but unsure of what else.
Thanks in advance.
|
|
|
Post by p5curly on Nov 22, 2015 17:39:42 GMT
We only had hazard and fog buttons for our Iva test
|
|
|
Post by greyreplicar on Nov 23, 2015 17:01:03 GMT
We only had hazard and fog buttons for our Iva test Thanks.
|
|
|
Post by greyreplicar on Nov 25, 2015 22:47:16 GMT
Who is it that has got the Moto lita steering wheel??? Thanks in advance.
|
|
|
Post by greyreplicar on Nov 25, 2015 22:52:04 GMT
Who is it that has got the Moto lita steering wheel??? Thanks in advance.
|
|
|
Post by mawdo81 on Nov 26, 2015 8:47:35 GMT
Have you tried searching the forum? marmot0 mentioned it in his racing replicar thread...
|
|
|
Post by marmot0 on Nov 26, 2015 12:59:03 GMT
Yes I have one fitted, feels great as well as looking good.
|
|
|
Post by marmot0 on Nov 26, 2015 20:59:43 GMT
here it is, but I still need to sort the center not sure 'momo' really suits it
|
|
|
Post by greyreplicar on Nov 26, 2015 22:45:25 GMT
here it is, but I still need to sort the center not sure 'momo' really suits it Looks good. Where was it from and how much?
|
|
|
Post by Stiggy on Nov 26, 2015 22:51:32 GMT
freebies on black Friday, I have 2 40mm dia MEV logo drip resin dome badges, self adhesive, one each to the first 2 that claim one with address on info@mevltd.co.uk
|
|