|
Post by dave on Oct 22, 2014 15:30:09 GMT
Hi guys
Getting ready for engine and gearbox separation from the subframe and noticed there are two switches on the gearbox, obviously one is the reversing switch but what is the other?
It looks like one has a leak so want to get this sorted before painting, oh and by the way it is a 94 1.6 5 speed.
Thanks in advance Dave
|
|
|
Post by Stiggy on Oct 22, 2014 16:16:40 GMT
Hi, the one with the round push on terminals is for the reverse light and the other with the flat terminals is a neutral switch to tell the ecu what mode to start up in.
|
|
|
Post by dave on Oct 22, 2014 16:33:33 GMT
Thanks Stuart
|
|
|
Post by dave on Oct 23, 2014 21:07:10 GMT
Should I replace the switches or is there a cure for the leak like a washer of some sort or sealant?
|
|
|
Post by clintavo on Oct 23, 2014 22:15:43 GMT
In my experience, leaks have all been through the switch itself. Replace
|
|
|
Post by dave on Oct 24, 2014 16:25:28 GMT
Thanks, may as well replace for peace of mind then
|
|